i.safe MOBILE IS-VS1A.1
€25,000.00
Type: IS-VS1A.1
| Ex-marking | II 2G Ex ib IIC T4 Gb | II 2D Ex ib IIIC T135°C Db |
| Certification | ATEX & IECEx Zone 1/21 |
| OS | Android 14 (included IS540.1) |
| Compatibility | Valve Sense Inspection set: measuring electronic IS-VS1A.1 + sensoren IS-SU150F1.1/IS-SU150F2.1 (100-450 kHz), optioneel IS-SU030F2.1 (25-80 kHz), waveguide, sensorkabels + IS540.1 smartphone |
| Size | 6″ |
| Battery | 4400 mAh |
| Warranty | 24 months manufacturer warranty (extendable to 36) |
| Availability | In stock · ships from NL |
Description
i.safe MOBILE IS-VS1A.1 · ATEX/IECEx Zone 1/21
The i.safe MOBILE IS-VS1A.1 is an intrinsically safe device from i.safe MOBILE, certified for ATEX/IECEx Zone 1/21. All specifications below are taken from the official i.safe MOBILE datasheet.
Why the IS-VS1A.1?
- II 2G Ex ib IIC T4 Gb | II 2D Ex ib IIIC T135°C Db
- Android 14 (included IS540.1)
- 5G NR + 4G LTE, Wi-Fi 6 (802.11 a/b/g/n/ac/ax), Bluetooth 5.2, NFC, GPS/A-GPS/Glonass/A-Glonass/Beidou/Galileo, 1 nano SIM + eSIM (IS540.1); measuring electronic via 16-pin ISM interface
- 4400 mAh
- 6″ Gorilla Glass 3rd generation, 1080 x 2160 pixels FHD (IS540.1) · 219.3 g
- MDM / zero-touch enrollment ready
Suitable for
Zone 1/21 areas in chemical and petrochemical plants, oil & gas, pharma and logistics: operator rounds, permit-to-work, communication, scanning, documentation and remote assistance.
Globally certified
ATEX and IECEx Zone 1/21 (II 2G Ex ib IIC T4 Gb | II 2D Ex ib IIIC T135°C Db) plus further country certifications where applicable.
Additional information
| Brand | |
|---|---|
| Operating System | |
| Processor | Qualcomm QCM6490 |
| Memory | 8 GB RAM, 128 GB internal memory, microSD memory up to 128 GB |
| Supported frequency bands | 2G GSM: 850/900/1800/1900 MHz |
| Dimensions | Size: 180,0 x 84,9 x 20,6 mm, weight: 422 g |
| Display | 6“, Gorilla Glass® 3rd generation, 1080 x 2160 pixels, FHD |
| Battery | 4400 mAh, replaceable |
| Camera | 48 MP AF rear camera, 5 MP FF front camera |
| SIM | support 1 nano SIM + eSIM |
| Connections | Wi-Fi 6: IEEE 802.11 a/b/g/n/ac/ax/e/k/r/v |
| Ports | in/out 16-pin ISM interface |
| Sensors | Accelerometer, Gyroscope, Light, Magnetic, Proximity, Pressure sensors |
| Types of protection | IP68 dust-/waterproof, MIL-STD-810H, usable from -20 °C to +55 °C |
| Analog band width | 20 … 500 kHz |
| Input range | 94 dBAE / 100 dBAE |
| Sampling rate | Res.: 2 MHz / 16 bit |
| Noise floor | <12 μVRMS (95 – 300 kHz) |
| Power consumption | <700 mW |
| Operating temperature | -40 °C … + 120 °C |
| Frequency range | 25 – 80 kHz |
| Shield Cross-Talk | > -80 dB |
| IS-SC120BB1.1 | Sensor Cable |
| Length | L120 cm |
| Connector | SMB <-> SMB |
| Sheathing | Braided hose |
| IS-WGLF1.1 | Waveguide Lock |
| Diameter | 55 mm |
| Temperature range | > 120 °C and < -50 °C |
| Dimension | 220 x 7 mm |
| Weight | 89,8 g |
| Geographic Certification | |
| Zone Classification |
PDF Datasheet Viewer
Geographic Suitability
Check the top-left corner of the product image for certifications. For the latest details, refer to the datasheet or contact us. Generally, these certifications apply to the following regions:Â
| Certification | Geography |
|---|---|
| NEC/CEC (Class/Division) | USA, Canada |
| NEC/CEC (Class/Zone) | USA, Canada |
| ATEX | Mandatory in EU, EEA, Turkey and United Kingdom. Accepted in most countries not listed elsewhere in this table. |
| INMETRO | Brazil (based on IECEx) |
| IECEx | Mandatory in Australia and Israel. Accepted in most countries not listed elsewhere in this table. |
Check our comprehensive guide on explosion proof equipment certifications and where they're recognized.
Related products
-
ATEX Zone 1/21IECExClass I, Div I
-
ATEX Zone 0
-
ATEX Zone 2/22
