Armadex OZC 3 ATEX Camera
€1,738.00
Type: OZC-3
| Ex-marking | II 3G Ex ic IIC T4 Gc | II 3D Ex ic IIIB T135°C Dc |
| Certification | ATEX & IECEx Zone 2/22 |
| Camera | 12 MP 1/2.3″ BSI CMOS · 4× optical zoom (25-100 mm equiv.) |
| Video | Up to 4K 30p · Full HD 60p |
| Ambient temperature | -10 °C to +40 °C (operating) · IP54 |
| Size & weight | 113.9 × 65.8 × 32.7 mm · 249 g |
| Availability | Lead time on request |
Description
Armadex OZC 3 ATEX Camera · ATEX & IECEx Zone 2/22
The Armadex OZC-3 is a digital camera for hazardous areas in Zone 2 and Zone 22 (II 3G Ex ic IIC T4 Gc, II 3D Ex ic IIIB T135°C Dc). It is based on the OM System Tough TG-7 and modified by Armadex to intrinsic safety Ex ic: the xenon flash is removed, the LED light remains active. With a 12 MP sensor, 4× optical zoom, macro from 1 cm and 4K video it is used for inspections and maintenance documentation. The battery and connector compartments may only be opened, and the battery only charged, outside the hazardous area. A SanDisk Extreme Pro 128 GB SD card is included; an SD card is required to operate the camera.
Why the OZC 3 ATEX Camera?
- ATEX and IECEx Zone 2/22: II 3G Ex ic IIC T4 Gc · II 3D Ex ic IIIB T135°C Dc
- 12 MP 1/2.3″ BSI CMOS sensor, 4× optical zoom (25-100 mm equiv.), sensor-shift image stabilization
- Macro and microscope mode from 1 cm, video up to 4K 30p
- Hazardous-area modes: Construction Mode, Document Mode (label capture), GPS and environmental logging
- Wi-Fi and Bluetooth for image transfer to an Ex smartphone via OI.Share; IP54, -10 °C to +40 °C
Suitable for
Zone 2/22 areas in chemical and petrochemical plants, oil & gas, pharma and logistics: operator rounds, permit-to-work, communication, scanning, documentation and remote assistance.
Globally certified
ATEX and IECEx Zone 2/22 (II 3G Ex ic IIC T4 Gc | II 3D Ex ic IIIB T135°C Dc) plus further country certifications where applicable.
Additional information
| Brand | |
|---|---|
| Ex Markings | ATEX: II 3G Ex ic IIC T4 Gc · II 3D Ex ic IIIB T135°C Dc |
| Certificates | ATEX: OBAC 25ATEX0069X |
| Standards | EN IEC 60079-0:2018, EN 60079-11:2012 |
| Special conditions | Only outside the hazardous area: opening or closing the battery compartment, removing or installing battery and memory card, charging the battery and connecting the HDMI cable |
| Camera | 12 MP 1/2.3" BSI CMOS, TruePic VIII processor |
| Features | Macro and microscope mode from 0.01 m |
| Ingress protection | IP54 |
| Memory card | SD card required (micro SD adapters not supported) |
| Dimensions | 113.9 × 65.8 × 32.7 mm |
| Weight | Approx. 249 g (with battery and memory card) |
| Lenses | 25-100mm (35mm equiv.) – 4x Optical Zoom |
| Image Sensor | 12 MP – 1/2.3” BSI CMOS |
| Photos | JPEG, RAW(12-bit lossless compression), |
| Video | 3840 × 2160 (4K) 30p, 25p |
| Processor | TruePic VIII |
| Shutter Speed | 1/2 – 1/2000 sec. (A mode: up to 4 sec.) |
| Connectivity | USB Type-C, Micro HDMI (type D) |
| Power | OM SYSTEM LI-92B Li-ion battery, 3.6 V / 1350 mAh |
| Geographic Certification | |
| Zone Classification |
PDF Datasheet Viewer
Geographic suitability
Check the top-left corner of the product image for certifications. For the latest details, refer to the datasheet or contact us. Generally, these certifications apply to the following regions:
| Certification | Geography |
|---|---|
| NEC/CEC (Class/Division) | USA, Canada |
| NEC/CEC (Class/Zone) | USA, Canada |
| ATEX | Mandatory in EU, EEA, Turkey and United Kingdom. Accepted in most countries not listed elsewhere in this table. |
| INMETRO | Brazil (based on IECEx) |
| IECEx | Mandatory in Australia and Israel. Accepted in most countries not listed elsewhere in this table. |
Check our comprehensive guide on explosion proof equipment certifications and where they're recognized.




